Vanguard 14-D Kit

$16,950.95

The price above gets you everything you need to build our Vanguard 14 as seen on this website. 

What do I get for that price?

• Hull & Deck-joined with outer skirt attachment strips formed
• As molded bulkheads: forward flotation, helm bulkheads (pair), mid bulkheads (pair), rear flotation (pair), steering box, and gas tank mount
• Duct with aluminum support tubes and tube fittings
• 28hp Kohler EFI engine
• 2 hovercraft seats unassembled
• 3 rudders with stainless pivots/HDPE bearing blocks and fasteners
• 55” 3-bladed propeller: trimmed and balanced
• Drive kit: bearings, pulleys, idlers, keystock and belt
• Navigation lights: red/greed side lights and white/strobe.
• Fuel filter/water separator
• 3 deck plates
• Throttle control
• Steering & throttle cables with installation components
• Skirt cut out and ready for gluing: includes flotation strips & glue
• Black steering wheel
• Foot brake pedal
• Voltmeter
• Red & blue Indicator lights
• Lift fan: assembled and balanced
• Standard tachometer/hourmeter
• Battery switch
• 3 Switches with mounting panel
• Fuse block/ground bar
• Sealed fuse holder with 40 amp fuse
• Handles
• HDPE runners/skirt attachments, pre-drilled.
• Bow eye
• 6 gallon fuel tank w/return
• Windshield, acrylic
• Skirt attachment strips: inner and outer
• Battery
• 12v receptacle
• Engine/prop frame: stainless, fully welded
• Steering shaft assembly
• Engine shaft extension/fan adaptor
• Touch blocks
• Safety netting and installation hardware
• Engine cover & lid with mounting hardware/latches
• Nose cone
• Idler covers-pair
• Belt channel
• Rudder bar material, stainless
• Rudder slave bar material, aluminum
• Mini adhesive gun with glue and mixing tips
• Cable tie mounts
• Wiring harness
• Air cleaner hose and clamps/2” AL tube
• Propeller spacer
• Glue (for attaching bulkheads, etc)
• Fuel pump & regulator with assorted fittings
• Oxygen sensor
• Propeller shaft: notched for retaining rings & retaining rings

Extras:

• Fixed mount aluminum gas tank-12 gal capacity (includes extra cost for the wiring harness): add $500
• Carbon fiber Windshield frame with glass windows and a dual wiper/wash system (kit): add $1,020
• Canvas top kit: add $1,275
• Electric defrost upgrade kit: add $364
• Vanguard Fastener Kit: add $250
• Hardware for installation: add $165
• Computer Box & Standoffs: add $28
• Skirt glued together and ready to install: add $433

We can customize this kit to suit your needs.  Just call us and ask! 1-(360) 426-3170.

This complete website (www.amphibiousmarine.com) and all content (including photographs and verbiage) is copyrighted and cannot be used without permission. © 1996-2010 Amphibious Marine, Inc. All Rights Reserved.